MAINTENANCE CHEMICALS

MAINTENANCE CHEMICALS

CKS-1100 (WATER BASED OIL AND DIRT CLEANER)

It does not burn because it is water-based. Therefore, it can be used instead of flammable and dangerous substances such as gas, gasoline and diesel. It is economical, high, can be reproduced with water. It is strong (does not cause rusting). It is environmentally friendly. It is biodegradable. It does not contain phosphate.

Oily, dirty surfaces, surfaces, workshop floors and walls in the kitchen; It can be used in grills, ovens, oily surfaces, fans, heating and ventilation systems, washing parts and the like.

CKS-2200 (WATER BASED CONCENTRATED OIL AND DIRT CLEANER)

It is safer in cleaning compared to gasoline, thinner and diesel oil, it is not flammable. It is economical: It can be diluted up to 1 in 50 with hot or cold water. It has no harm to the environment. It is biodegradable. Does not contain solvent. It is fast acting, quickly dissolves oil, grease, dirt and deposits.

CKS-2200

It can be used on many surfaces such as metal surface cleaning before painting, kitchen hoods, oven cleaning, rubber, plastic, ceramic, concrete, stone, tile, sheet metal, aluminum, enamel, marble. It provides perfect cleaning in all kinds of cleaning that will be placed in the pressure sprayers. Its foam is regulated. It can be used with washing machines.

STC-2260 (WATER BASED CONCENTRATED ALUMINUM SURFACE CLEANER)

It is specially formulated to clean air conditioner cores and radiator cores without brushing or wiping.

CKS-2260

It is used for cleaning and shining all aluminum surfaces, cleaning air conditioner cores and air conditioning coils, ventilation shafts. Since the heat conduction will increase, the efficiency of cooling, heating and ventilation increases. Aluminum surfaces gain a clean and shiny appearance. It provides perfect cleaning in all kinds of cleaning that will be placed in the pressure sprayers. Its foam is regulated. It can be used with washing machines. It is used for cleaning industrial, household, window type, cooler and air conditioner cores, radiator cores of all vehicles, aluminum radiators and surfaces.

CKS-3300 (MULTI-CONCENTRATED BURNED OIL AND TAR CLEANER)

It is specially formulated to remove burnt oils and tars. It disrupts the chemical structure of oils and allows them to dissolve easily. Over 90% biodegradable.

It removes all soot stains, oven stains, tar and similar stains. It perfectly cleans the oil layers consisting of flue smoke, soot, dirt and exhaust gases. In the maritime industry, it is used for cleaning ships' bilge tanks, fuel tanks, and other cargo tanks. It is used in the cleaning of wine industry equipment, food and agricultural machinery, poultry, meat industry equipment and oven pans.

CKS-6400 (POWERFUL OIL AND TAR SOLVENT THAT CAN EMULSION WITH WATER)

It forms a viscous emulsion when mixed with water thanks to its special formula. With this shape, it cleans stubborn dirt, oil and dirt by holding on vertical surfaces. Oil does not leave the surface it adheres to until the tar dissolves. It is not flammable when mixed with water. Therefore, it is safer than diesel and gasoline from other solvents. It does not emit toxic or disturbing smoke.

It removes organic and inorganic dirt and oils from construction machinery, car engine blocks and all kinds of equipment. It gives much better results than cleaning with steam, diesel and detergent in car engine blocks. It can be used for cleaning all devices that are not damaged by water.

CKS-6501 (ELECTRIC MOTOR AND CONTACTOR CLEANER)

It provides cleaning of electrical devices and motors without disassembled or disassembled. It repels moisture. It evaporates slowly.

It is used for cleaning and dehumidifying the windings of all electric motors. It is used for cleaning dusty, oiled and contaminated contactors that may have arcs. It reduces electrical failures and eliminates the risk of fire It extends the useful life of contactors. It is used for cleaning laminate and glue on metal parts, bearings, brake drums, wooden surfaces.

CKS-6602 (MECHANICAL PARTS CLEANING CHEMICAL)

It is used for oil cleaning on metal and machine surfaces. It is solvent based. It is not flammable. Odorless.

It can be used safely in cleaning all metal surfaces and bearings. It does not damage the paint.

CKS-6715 (NON-COMBUSTIBLE CLEANING SOLVENT)

Since it is not flammable, it can be used safely instead of thinner. It cleans better than thinner. It evaporates quickly and leaves no residue.

Due to its insulation, it can be used safely in panel cleaning and contactor cleaning. It is not used for engine cleaning.

CKS-6800 (PAINT REMOVER)

It dissolves all types of paints. It is suitable for removing stained or old paints and can be used on all types of metals.

CKS-6900 (ELECTRONIC CARD CLEANER)

Removes all grease, oil and dirt. Does not leave a film layer on the surface. Does not damage plastic, rubber, and paint. It evaporates rapidly without leaving any residue. Non-conductive. Non-corrosive. It enables cleaning of electronic parts and devices while the system is running.
It is used for cleaning all electronic cards and printed circuits.

CKS-M 100 (ACIDIC METAL SURFACE CLEANER)

In just one process, it corrodes the metal surface microscopically, cleans rust and oil, passes the surface and provides good adhesion of the paint. It is a special compound that easily removes oil, grease, dirt and rust layers from metal surfaces. It cleans the metal surface microscopically with chemically controlled methods and prepares it before the protective material to be applied. Recommended on aluminum, iron, steel, bronze, copper, brass, cadmium and plated lead.

CKS-DS3 (MORTAR, LIME, CONCRETE REMOVER)

It is a product developed for difficult cleaning processes. It is a mixture of acids. The corrosive effect of acids on the metal is minimized thanks to the inhibitors it contains. It removes corrosion deposits, stoning formed by minerals, and easily removes rust layers and heavy dirt.

Cleaning of metal surfaces, removal of rust layers, mortar cleaning from steel, wood, plastic molds, cleaning of concrete residues from cement silos, concrete pumps, mixers, steel construction scaffolds. The mortar formed as a result of construction from tiles, bathtubs and glasses is used for cleaning lime and rust stains.

CKS-S-100 (PRECISION SURFACE PROTECTOR)

It prevents electrical failures, repels moisture and cleans.
It removes water and moisture thanks to its continuous molecular film formation. It can be applied on wet and dry surfaces. It dissolves dirt, scum and other corrosive substances that have formed. It has a lubricating effect on all moving parts. Applied devices should be checked at regular intervals and reapplied when external conditions require it. Will never dry out, harden, become brittle or crack

It is used in electrical and electronic cable circuits, motors, batteries, switches, cooling devices, transformers, ignition systems and many equipment.

CKS-S200 (RUST PROTECTOR)

It is used to protect all iron and steel parts that will not be painted against rusting. After application to the surface, a translucent greenish brown film layer remains on the surface. The film layer protects the surface against rust. According to our experience, the protection period can be 3 years.

Molds, bolts, nuts, discs, rods, iron and steel construction piers, concrete mixers, all iron and steel parts that encounter acid vapors in the chemical industry, Water towers, marine equipment and equipment, seawater tanks, brine tanks, pipes, steel coils, steel plates are protected against rust for a long time.